MIL-STD-3009 was developed by the Department of Defense in February 2001 and superseded MIL-L-85762A. It specifies that NVIS White for crew cockpit and utility lighting. NVIS Green A is grand fathered into the cockpit for certain applications, but not for new applications.

Mike/Lip Lite (SSI-ML8)
The standard issue Military Mike Lite NSN: 6240-01-362-4902

3 NVIS* Green A LEDs

Compatible with Night Vision
A Generation III product. Preserves dark adaptation. Push ON - Push OFF switch that can be actuated by the lip or tongue. A slight push on the switch causes momentary light, while a further push keeps the light on until another push turns the light off. Uses 2 AA batteries (not included)

Mike/Lip Lite (SSI-ML9) - DISCONTINUED  (See SSI-ML18)

Mike/Lip Lite (SSI-ML10)
3 Red LEDs

Same operation as the SSI-ML8 except has 3 Red LEDs
Preserves dark adaptation for use in Red lit cockpits
Not for use with NVG operations
Uses 2 AA batteries (not included)

Mike/Lip Lite (SSI-ML11) NSN: 5965-01-423-5159
(1) Infrared + (2) NVIS* Green A LEDs

Compatible with Night Vision
Switch from IR to Green at the battery pack
Use NVIS Green for NVG compatible light & IR to enhance ambient light with NVGs. IR light shines over 150 Feet
Uses 2 AA batteries (not included)

Mike/Lip Lite (SSI-ML12) - DISCONTINUED  (See SSI-ML15)

 Mike/Lip Lite (SSI-ML14) NSN: 6230-01-452-5803
2 Bright White LEDs + 1 Bright NVIS* Green A LED
Compatible with Night Vision Use Green when preserving dark adaptation and White when seeing colors is vital. Never needs a lamp replacement if used as directed. Ships w/ML2-7 battery holder for use with two AA batteries. Optional battery configurations include 3 AA or AAA batteries for 4.5 volt options. Originally designed for crewmembers in the cabin, such as Air MEDEVAC, or cargo aircraft however, some pilots choose to use this for flight.

 Mike/Lip Lite (SSI-ML15)
2 Red + 1 NVG compatible White LED

Compatible with Night Vision
Preserves dark adaptation for use in Red lit cockpits
Use red when preserving dark adaptation is desirable. Use White when seeing colors is necessary. While the White Light is not as bright as the Xenon lamp on the ML-14, its an LED that will not break if dropped. Also the White LED uses far less power than the Xenon lamp and will burn continuously for 7 days on 2 AA batteries (not included)

 NEW & IMPROVED Mike/Lip Lite (SSI-ML18)
3 Filtered NVIS* White LEDs

Compatible with Night Vision
This is the BEST choice for white light devices used while operating under NVIS conditions. Will not filter out colors and allows for all colors to be visible in the cockpit, such as while looking at maps. An LED will last indefinitely. Uses 2 ea. AA batteries (not included).

 Mike/Lip Lite (SSI-ML19)
2 White LEDs + 1 Infrared LED

Compatible with Night Vision
Switch from IR to White at the battery pack. Use White for NV compatible light where dark adaptation is not necessary and where a bright, white light is desired. Use IR to enhance ambient light with NVGs. IR light shines over 150 Feet. Because an LED does not produce heat they are invisible to FLIR systems.  LED average output is 1.2 Fc at 18" and the it will last indefinitely. Uses 2 AA batteries (not included).

 Mike/Lip Lite (SSI-ML20)
3 Infrared LEDs

Compatible with Night Vision
Because an LED does not produce heat they are invisible to FLIR systems. For use where ambient light is not available The 3 IR LEDs will emit infrared light that NVGs can see for 200 Feet or more and will last indefinitely.
Uses 2 AA batteries (not included)

 Mike/Lip Lite (SSI-ML21)
3 NVIS* Bright Green LEDs

Compatible with Night Vision
This is absolutely the BEST color of green light to use with NVGs. Same as the ML-8, just brighter. Preserves dark adaptation. Push ON - Push OFF switch that can be actuated by the lip or tongue. A slight push on the switch causes momentary light, while a further push keeps the light on until another push turns the light off. Uses 2 AA batteries (not included)

Mike/Lip Lite (SSI-ML22)
2 NVIS* Green A + 1 Filtered NVIS* White LED

Compatible with Night Vision
This is the ideal green and the white is filtered with NVIS filter, making this light the best solution for green and white. Use Green when preserving dark adaptation is desirable. Use White when seeing colors is necessary. Uses 2 AA batteries (not included)

Mike/Lip Lite (SSI-ML23)
2 Bright NVIS* Green A LEDs + 1 Filtered NVIS* White LED
Compatible with Night Vision
This is the ideal bright green and the white is filtered with NVIS filter, making this light the best solution for green and white.
Use Green when preserving dark adaptation is desirable
Use White when seeing colors is necessary
Uses 2 AA batteries (not included)

  Mike/Lip Lite (SSI-ML26)
1 Bright NVIS* Green A LED (Momentary Switch) + 2 Filtered NVIS* White LED (Toggle ON/OFF)

Compatible with Night Vision
This is the ideal bright green and the white is filtered with the NVIS filter, making this light the best solution for green and white.
Use Green when preserving dark adaptation is desirable
Use White when seeing colors is necessary
Uses 2 AA batteries (not included)

  Mike/Lip Lite (SSI-ML28)
2 Bright NVIS* Green A LEDs (Momentary Switch) + 1 Infrared LED (Toggle ON/OFF)

Compatible with Night Vision
The bright green is the ideal color for NVIS Green A.
Use Green when preserving dark adaptation is desirable
Because an LED does not produce heat they are invisible to FLIR systems. For use where ambient light is not available The 3 IR LEDs will emit infrared light that NVGs can see for 200 Feet or more and it will last indefinitely.
Uses 2 AA batteries (not included)

 Mike/Lip Lite (SSI-ML30) [Old PN: SSI-ML18 wo/2A]
3 Unfiltered White LEDs.

Compatible with Night Vision
Because LEDs do not produce heat they are invisible to FLIR systems. For use where dark adaptation is not necessary and where a bright, white light is desired. Will not filter out colors and allows for all colors to be visible in the cockpit, such as while looking at maps.
Uses 2 AA batteries (not included)

 Mike/Lip Lite (SSI-ML31) [Old PN: SSI-ML19 wo/2A]
1 Infrared LED + 2 Unfiltered White LEDs
Compatible with Night Vision Switch from IR to White at the battery pack. Use White for NV compatible light where dark adaptation is not necessary and where a bright, white light is desired. Use IR to enhance ambient light with NVGs. IR light shines over 150 Feet. Because LEDs do not produce heat they are invisible to FLIR systems.  LED average output is 1.2 Fc at 18" and the LEDs last indefinitely. Uses 2 AA batteries (not included).

 Mike/Lip Lite (SSI-ML32) [Old PN: SSI-ML22 wo/2A]
2 NVIS Green A LEDs + 1 Unfiltered White LED
The green is the ideal color for NVIS Green A. The white is unfiltered.
Use Green when preserving dark adaptation is desirable.
Use White when seeing colors is necessary.
Uses 2 AA batteries (not included)
Compatible with Night Vision

 Mike/Lip Lite (SSI-ML33) [Old PN: SSI-ML23 wo/2A]
2 Bright NVIS* Green A LEDs + 1 Unfiltered White LED
The bright green is the ideal color for NVIS Green A. The white is unfiltered.
Use Green when preserving dark adaptation is desirable
Use White when seeing colors is necessary
Uses 2 AA batteries (not included)
Compatible with Night Vision

 Mike/Lip Lite (SSI-ML34) [Old PN: SSI-ML26 wo/2A]
1 Bright NVIS* Green A LED (Momentary Switch) +
2 UN-Filtered NVIS* White LED (Toggle ON/OFF)
The bright green is the ideal color for NVIS Green A. The white is unfiltered.
Use Green when preserving dark adaptation is desirable
Use White when seeing colors is necessary
Uses 2 AA batteries (not included)
Compatible with Night Vision

MAXILLO Mike Lites

	Maxillo Mike Lites are designed to be used on the standard M-87, the M-162 Tempest, or other like microphones
	A second set of lights are attached to a Maxillo face shield
	A switch on the battery pack switches between the inside and the outside light
	Push ON - Push OFF switch that can be actuated by the lip or tongue
	POS#1: Momentary light, POS#2: Steady On, POS#3: Off
	DOES NOT INCLUDE MAXILLO FACE SHIELD

 Maxillo Mike Lite (SSI-ML24) Lip Light System
3 NVG Green + 3 NVG Green LEDs
Compatible with Night Vision
Preserves dark adaptation.
Uses (2) AA batteries (not included)
DOES NOT INCLUDE MAXILLO FACE SHIELD

NSN: 6230-01-534-2760

 Maxillo Mike Lite (SSI-ML25) Lip Light System
3 NVG White + 3 NVG White LEDs
Compatible with Night Vision
Uses (2) AA batteries (not included)
DOES NOT INCLUDE MAXILLO FACE SHIELD

Accessories

Minimum $20.00 Order for Accessories unless ordering with Mike Lite

Mike Lite Dimmer (SSI-ML-DIM)
Works with ALL Mike Lites. Just snap in line between battery pack and Mike Lite. Allows user to increase or decrease light output of any Mike Lite. Optimizes available battery life by allowing user to decrease the Mike Lite output with fresh batteries. As battery life decreases, user slowly increases output to maintain favorite light setting. Also convenient to adjust the light output to compensate for various ambient light conditions as well as different levels of dark adaptation. Also works with Fingerlights if used with the Fingerlight AA Battery Adapter (SSI-FLAA)

Battery Holder (SSI-ML2-7)  NSN: 6160-01-537-1238
BATTERY HOLDER: Black plastic, holds 2 ea. AA batteries. This is a replacement battery holder.

Battery Holder (SSI-BG4)
BATTERY HOLDER: Black plastic, holds 4 ea. AA batteries.

Battery Holder Bag (SSI-BG-AA)
Cordura Nylon. Designed to hold a 2AA battery holder like the ML2-7 above. This is a replacement battery holder bag for the Mike Lites and Cap Lites. For lights without a switch on battery connector.

Battery Holder Bag (SSI-BG-AA/1)
Cordura Nylon. Designed to hold a 2 AA battery holder like the ML2-7 above. This is a replacement battery holder bag for the Mike Lites and Cap Lites. For lights with a switch on battery connector.

Wide Battery Holder Bag (BG-AA/4)
Cordura Nylon. Designed to hold 4 AA battery holder like the SSI-BG4

 Lamp Kit, Xenon (SSI-ML9-2)
A standard lamp replacement kit for Mike Lite series ML-12, ML-14, ML-14A and the Cap Lite series CL-8, CL-9, and CL-10.

Mount Kit (SSI-MK-1) NSN: 8475-01-507-0311
MOUNT KIT: Mounts the Mike Lites above to a variety of aviator microphones. Comes with an assortment of clips to attach the Mike Lite to all but the thinnest of mike booms. Of course like all of our products it is guaranteed to work. NOTE: This item not required for military helmets using the standard M-87 or the M-162 Tempest microphones such as the SPH-4 and HGU-56 helmets. All Mike Lites already include necessary hardware to attach to these standard helmets. However, if your unit has replaced the standard microphone with something else, then this MK-1 kit is probably needed.

Mount Kit for BOSE X (SSI-MK-1/BOSE)
Mounts the Mike Lites above to to the Bose Aviation Headset X.

Protective Cap (SSI-ML2-6A)  / (Must be ordered with Mike Lite) No individual orders please
Protective Cap for 9 volt batteries and AA battery holders. Protects your equipment from accidental damaged caused by improperly storing your equipment. Helps to prevent the shorting of the contacts on your equipment.

Weight Bag (SSI-BW-1) NSN: 2090-01-517-6694
Black, Cordura Nylon. For holding lead shot used to counterweight NVG's.
Comes with a plastic 6 Mil. Zip-Lock bag to hold loose weights securely in the bag.
Bag has double flap, and a full width 2" Velcro mounting strip.
Bag is 4 1/2" wide X 3 1/2" high.
Lead shot not included.

Other Aviation Products of Interest

Cap Lites are similar to Mike Lites. They are a good source to mount a light onto a "tankers" microphone boom (M138). However, these are great for hunting and fishing as well. Ever tried to tie a fishing lure at night and hold a flashlight? How about walking into or out of that favorite hunting spot in the dark. Very handy having light to see and be seen and have your hands free! Great for mechanics too.

Fingerlights  Seitz Scientific Industries Inc. is the original manufacturer of the Fingerlight. Only a Seitz "Lite" is authorized by the U.S. Army for use in Army aircraft because only our Fingerlights meet all 17 specifications outlined in the original R&D contract (Contract No. DAAK60-90-C-0042).

FOD Bags as manufactured by Seitz Scientific Industries, Inc., the original maker of the Lip Lite (Lip Light), Mike Lite (Mike Light) and Fingerlight (Finger Light). As well as offering an assortment of FOD bags, we also will customize the FOD bag to your specifications to meet your needs and requirements. All bags can be made with your logo. ALL BAGS COME IN A CHOICE OF THREE FLUORESCENT COLORS: ORANGE, YELLOW OR GREEN.

Home | Contact Us | About KERIF |  Export Regulations | How to Order

(702) 324-6463  /  (702) 869-8451 FAX  

sales@nitevis.com