Please Call
(702) 324-6463 or email sales@nitevis.com

Categories 

Home Page

 

Accessories

bullet

Bed Vaults

bullet

Console Vaults

bullet

Gun Vaults

bullet

Flashlights

bullet

PVS-7 Parts

bullet

PVS-14 Parts

bullet

Scopecoat Covers

bullet

Stun Guns

bullet

SureFire Lights

bullet

TruckVault's

bullet

Wilcox Products

Aiming Systems

bullet

Aimpoint Red Dot

bullet

Doctor Optic MRD

bullet

ELCAN Optical

bullet

EOTech Sights

bullet

LASER's

bullet

NV Weaponsights

Beacons/Markers

bullet

GloWands

bullet

Guardians

bullet

Lazer Stiks

bullet

Pegasus

bullet

Phoenix

bullet

VIP Visual/IR

bullet

9 Volt Series

NV Binoculars

bullet

AN/PVS-15 M953

bullet

AN/PVS-31 BNVD

bullet

ANVIS-6/9 M949

bullet

BMNVD

bullet

BNVD

bullet

BNVS-15

bullet

BTS Thermal

bullet

GPNVG

bullet

G15

bullet

PVS-7B/D

bullet

SENTINEL

bullet

STEINER Binoculars

Combat ID

bullet

Beacons-Markers

bullet

IFF-67 Blood Markers

bullet

IFF-980H SCHIMS

bullet

IR-US Flags

bullet

Vehicle CIDV Panels

bullet

Warrior GloTape

Goggle Main

bullet

ANVIS Goggles

bullet

AN/PVS-7B/D

bullet

AN/PVS-14B/D

bullet

AN/PVS-15

bullet

ATN G15

bullet

ATN NVG7

bullet

ATN PVS7

bullet

ATN PS15

bullet

BNVD

bullet

ENVG Fusion

bullet

SENVG Fusion

bullet

SENTINEL BNVS

Infrared Lighting

bullet

Aviation Lip Lights

bullet

Beacons/Strobes

bullet

Blocking Filters

bullet

Finger Lights

bullet

Flashlights

bullet

LASER Illuminators

bullet

Spotlights

bullet

Vehicle Lights

LASER's

bullet

AR-2A

bullet

ATPIAL

bullet

ATPIAL-C

bullet

CQBL-1

bullet

DBAL-A2

bullet

DBAL-A3

bullet

DBAL-A4

bullet

DBAL-D2

bullet

DBAL-I2

bullet

DBAL-PL

bullet

DBAL-RL

bullet

ITAL-Classic

bullet

OTAL-A

bullet

OTAL-Classic

bullet

SBAL-PL

bullet

SBAL-RL

Monoculars

bullet

AN/PVS-14B/D

bullet

AN/PVS-18 M983

bullet

GT14

bullet

DSNVG Fusion

bullet

ENVIS M703

bullet

Gen 1, Gen 2

bullet

LRS Surveillance

bullet

MICRO-Monocular

bullet

Mini-Monocular

bullet

Odin Thermal

Mounts & Bases

bullet

A.R.M.S.

bullet

Aimpoint

bullet

ELCAN

bullet

Wilcox

Thermal Imagers
bullet

BTS Thermal

bullet

DSNVG Fusion

bullet

Odin Imagers

bullet

OTS Imagers

bullet

NV3 NOPTIC Spotlight

bullet

THoR Thermal

bullet

Thermal-Eye X320

bullet

Thermal-Eye X640

Truck Vaults

 

 

 

bullet

Bed Vaults™

bullet

ConsoleVault™

bullet

Dog/K-9 Boxes

bullet

Extreme Series

bullet

Mobile Command

bullet

S&W Gun Safes

bullet

TrunkVaults™

Weaponsights
bullet

Aimpoint Red Dot

bullet

ATN Odin

bullet

ATN ThOR

bullet

BNS/BNS-LR

bullet

CNVD-T

bullet

CNVD-T3

bullet

Day/Night Scope

bullet

ELCAN Optical

bullet

EOTech HOLOgraphic

bullet

FLIR ThermoSight

bullet

FLIR T70 ACTS-SR

bullet

FLIR T75 ACTS-LR

bullet

FLIR T-90 TaNS

bullet

IR Hunter MK II

bullet

IR Hunter MK III

bullet

M2124 CNVD

bullet

PVS-4 | TVS-5

bullet

PAS-13G LTWS

bullet

PVS-22 Clip-On

bullet

PVS-27 MUNS

bullet

PVS-30-KAC

bullet

STEINER Scopes

bullet

US Optics

bullet

Zero Lens

Helpful Info

About KERIF

 Contact Us

Definitions

 Export Regulations
FAQ's

How to Order
Terms & Conditions

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


 

 

EOTech EXPS2-0 & EXPS2-0GRN HOLOgraphic Sights

Back to EOTech Mainpage

Sort By:  
Battery Type
Button LocationNight Vision CompatibleRelease SystemReticle StyleType of MountWaterproof How to tell if it is Counterfeit

To Order Online, click appropriate icon below or call (702) 324-6463 or email
***Call Today...Ship Today...Free Priority Delivery***
*ADDITIONAL DISCOUNTS AVAILABLE FOR FIRST RESPONDERS, MILITARY & LE*
We are required to adhere to a Minimum Advertised Price (MAP) by the manufacturer, and anyone not listing this minimum price is breaking the rules or might be selling counterfeit, so if you find a better price advertised anywhere, please let us know and we will try to meet or beat that price!

 

orderOnlineHelpEOTech EXPS2-0 UPC: 672294600275
MSRP: $599.00
KERIF Sale Price: $566.00

EOTech EXPS2-0GRN UPC: 672294600602
MSRP: $599.00
KERIF Sale Price: $566.00
 
+ 10% Coupon Available

Please visit our online store to receive an additional 10% off the normal sales price listed +++ Free S&H. Simply enter Coupon Code EOTECH at checkout to receive this 10% Discount.

EOTech EXPS2-0 & EXPS2-0GRN HOLOgraphic Sights
(Click images to enlarge)

* These EXPS2 models are not Night Vision compatible, for Night Vision compatibility see the EXPS3 sights

Ordering Information
EXPS2-0
EXPS2-0GRN
UPC: 672294600275
UPC: 672294600602
Operation
Optics Transmission Holography - 100% Parallax Free
Magnification 1X
Eye Relief Unlimited
Sealing Fog proof Internal Optics
Waterproof Submersible to 33'
Adjustment (per click) 0.5 MOA (1/2" at 100 yards)
Adjustment Range +/- 40 MOA Travel
Mount (Adjustable for Width) 1" Weaver or MIL-STD-1913 "Picatinny" Rail
Return to Zero Repeatable to 2 MOA after Re-Mounting
Heads-Up Display Window
Optical Surfaces Anti-Glare Coating
Window Dimensions 1.2" x 0.85" (30mm x 23mm)
Front Window Material 1/8" Solid Glass
Rear Window Material Shatter Resistant Laminate 3/16" Thick
Field-of-View (100yds) 30yds (28m) at a 4" Eye Relief
Standard Reticle 68 MOA Ring and 1 MOA Dot
Electrical
Brightness Adj. Range 146,000:1 brightest to lowest
NV Brightness Range: N/A
Function Button Location Side
Power Source (1) 123 Lithium Battery
Battery Life 600 Continuous Hours at Nominal Setting 12
Brightness Settings 20 Settings with Scrolling Feature
Auto Battery Check Indicator Flashing reticle upon start-up
Auto Shut-down At 8 hrs- programmable to 4 hrs
DIMENSIONS
Length
Width
Height
3.5" (91.4 mm)
2.4" (60.9 mm)
2.8" (71 mm)
Weight 11.2 oz (317 grams)
ENVIRONMENTAL DATA
Temperature Range -40ºF to 150ºF (AA Lithium)
-20ºF to +140 (AA Alkaline)
Max Storage Temp. -80ºC (176ºF)

Night Vision Compatibility: NO

*This Holographic Weapon Sight must be exported from the United States in accordance with Export Administration Regulations ECCN 0A987. Diversion contrary to U.S. law is prohibited. In accordance with U.S. law (Title 15 CFR part 746 and Supplement No. 1 to Part 774; and Title 31 CFR) resale/re-export or transfer of Holographic Weapon Sight Models 552, 551, 512, 511, 4X magnifier and 3X magnifier to certain designated countries is prohibited without prior written consent of the U.S. Department of Commerce. The Holographic Weapon Sight Models 553, 557 and 555 are controlled under U.S. International Traffic in Arms Regulations (ITAR) and may not be exported without proper authorization by the U.S. Department of State.

HWS Features

Electronic Features

The HWS uses state-of-the-art digital electronics design. Twenty brightness levels (plus 10 additional NV settings) ensure proper brightness control in either low light or very bright sunlight. An on-board microprocessor provides automatic battery check indicator, up/down brightness scrolling and programmable auto shutdown features. All electronics are fully encapsulated in shock absorbing resin compound.

 

The HOLOgraphic Advantage

The holographic patterns have been designed to be instantly visible in any light, instinctive to center regardless of shooting angle, and to remain in view while sweeping the engagement zone. Reticles are designed as large, see-through patterns to achieve lightning quick reticle to target acquisition without covering or obscuring the point of aim.

Heads Up, Full View

The HWS employs a true Heads-Up Display that eliminates blind spots, constricted vision, or the tunnel vision associated with tube sights. All user controls are flush to the HWS's streamline housing with no protruding knobs, battery compartments or mounting rings blocking vision at the target area. True, 2 eyes open shooting is realized. Instant threat identification is achieved by maximizing the operator's peripheral vision and ultimately gaining greater control of the engagement zone.

The Magic of Holography

     In Holography, all the information required to reconstruct the reticle image is recorded everywhere in the Heads-Up display window. If the window is obstructed by mud, snow, rain, etc., the HWS remains fully operational, with point of aim/impact being maintained. Even in such extreme cases where the laminated window is shattered, the HWS is fully functional! As long as the operator can see through any portion of the window, the entire reticle pattern is visible on target...the operator can still engage with confidence.

HWS Benefits

Extreme Durability

The HWS has been designed and tested to provide consistent, reliable performance even in the most hostile operational environments. It is waterproof, fog proof, shockproof, and temperature proof.

 

The HWS is designed to withstand Mil-Spec drop tests and still remain fully operational and hold zero. The HWS has been extensively tested in a punishing recoil simulator generating 3,500 G's of acceleration in less than 0.5 milliseconds (the recoil of a .454 Casull revolver) as well as various environmental chambers).

The Heads Up Display is constructed with a 3 layer, shatterproof laminate glass that is 3/16" thick for added durability. Additional protection of the Heads Up Display is provided with a "roll bar" ruggedized hood.

No Revealing Signature...The HWS does not emit any muzzle side position revealing light signature...the projected reticle pattern is visible only to the operator. Even Gen III night vision equipment cannot detect muzzle side signature of the operator's position.
     All optical surfaces are flat and treated with anti-reflective coatings eliminating additional muzzle side signature due to reflective glare. No need for costly glare elimination filters that reduce the effective light transmission and further dim the target area.

How to make a Hologram

     Holography is described scientifically as a wave front reconstruction process. Unlike a camera which forms and records the two-dimensional image of an object on film, a hologram records and reconstructs the light field propagating from a three-dimensional object to the viewer. A good analogy is the recording and play back of sound. The sound waves (e.g. music) are encoded and recorded on a disk. Upon proper decoding, the original sound waves are reconstructed. With holography, the field is encoded in the form of an interference pattern and recorded as refractive index variations on a clear window. The decoding is achieved by illuminating the hologram with laser light and the light field that was propagating from the object scene to the hologram window is reconstructed. Thus, a viewer cannot tell if the three-dimensional image he sees is "live" or a holographic reconstruction.

     The Holographic sight makes use of the capability of a hologram to construct a three-dimensional image to produce a reticle that is projected out to the target plane. This is achieved by using a large, high quality aberration free lens to project the pattern as illustrated. The reticle image could be of any light pattern, any geometric shape or size, and produced in either 2 dimensional or 3 dimensional form. The holographic reticle is uniformly bright and distortion-free regardless of image size. A parallax free image is created with a large and bright aiming pattern allowing quick target acquisition, particularly in close quarter combat situations. At the same time, the HWS can produce an aim point as small as the human eye can resolve to achieve the highest aiming accuracy possible without magnification.

EOTech Limited Warranty

All EOTech products are created with pride in the USA. More importantly, they are manufactured with our customer's satisfaction in mind. EOTech warrants every product to be free from defects in materials and workmanship for a period of 2 years from the original date of purchase.

EOTech will promptly repair or replace, at its option, any product which is defective in material or workmanship, without charge. All of the costs that are associated with the product shipment will be incurred by the owner. EOTech products, to be repaired under the warranty service, must have a valid return authorization number, which purchasers may obtain by clicking Return Authorization Request Form or calling EOTech's Repair & Service Department at (734) 572-2176 during normal business hours. All products must be sent to:

L-3 EOTech Repair & Service Department
1201 E. Ellsworth Road
Ann Arbor, Michigan 48108
Reference: RA#

This warranty does not cover defects caused by improper handling, installation or maintenance, abnormal use or unapproved alterations. EOTech shall not, in any event, be liable for any damages, including any lost profits, lost savings or any other incidental or consequential damages arising out of the use or inability to use such products. This warranty gives the owner certain legal rights, and possibly other rights, which vary from state to state.

 

Home | Contact Us | About KERIF Export Regulations | How to Order

KERIF Night Vision
(702) 324-6463  /  (702) 869-8451 FAX  

sales@nitevis.com or kerifnightvision@earthlink.net