Cap Lites are similar to Mike Lites. They are a good source when needing to mount a light onto a "tankers" microphone boom (M138). However, these are great for hunting and fishing as well. Ever tried to tie a fishing lure at night and hold a flashlight? How about walking into or out of that favorite hunting spot in the dark. Very handy having light to see and be seen and have your hands free! Great for mechanics too!

Cap Lite (SSI-CL-8) Cap Light
(2) Amber LED's and (1) Xenon White lamp. Small, lightweight.
Mounts to a ball cap, hard hat, Bike hat. Etc.
White light burns 2 Hours, averages 6 Fc. at 18"
Amber light burns 48 Hours, averages 5 Fc. at 18"
Uses (2) AA batteries (not included)

 

 

Cap Lite (SSI-CL-9) Cap Light 
(2) Bright Green LED's and (1) Xenon White lamp
Small, lightweight and easy to install & operate
Mounts to a ball cap, hard hat, helmet, etc.
White light burns 2 Hours, averages 6 Fc. at 18"
Green LED's burns 48 Hours, averages 4 Fc. at 18"
Uses (2) AA batteries (not included)

 

Cap Lite (SSI-CL-10) Cap Light
(2) Red LED's and (1) Xenon White lamp
Small, lightweight and easy to install & operate
Mounts to a ball cap, hard hat, helmet, etc.
White light burns 2 Hours, averages 6 Fc. at 18"
Red LED's burns 48 Hours, averages 4 Fc. at 18"
Uses (2) AA batteries (not included)

 

Cap Lite (SSI-CL-11) Cap Light
(3) White LED's.
Small, lightweight and easy to install & operate
Mounts to a ball cap, hard hat, helmet, etc.
White light burns 48 Hours
White light output averages over 4 Fc. at 18"
Uses (1) 9-Volt Battery (not included)

 

Cap Lite (SSI-CL-12) Cap Light
(2) NVG Green LED's + (1) Infrared LED

Compatible with Night Vision
Toggle between Green and IR with a switch on the battery pack.
Can be used on the standard M-138 Armor crewmember microphone, or other like microphone on a helmet or headset.
Has a Push ON - Push OFF switch that can be actuated by the lip or tongue.
Uses (2) AA batteries (not included)

Cap Lite (SSI-CL-16) Cap Light
(3) NVG Bright Green LED's

Compatible with Night Vision Preserves dark adaptation.
Can be used on the standard M-138 Armor crewmember microphone, or other like microphone on a helmet or headset. A Generation III product using Three LED's for brightness.
Has a Push ON - Push OFF switch that can be actuated by the lip or tongue
Uses 2 AA batteries (not included)

Cap Lite (SSI-CL-17) Cap Light
(1) Infrared LED + (2) Bright NVG Green LED's
Compatible with Night Vision

Switch from IR to Green at the battery pack. Can be used on the standard M-138 Armor crewmember microphone, or other like microphones on a helmet or headset. Use Green for NVG compatible light. Use IR to enhance ambient light with NVG's. IR light shines over 150 feet. Has a Push ON - Push OFF switch that can be actuated by the lip or tongue.
Uses 2 AA batteries (not included)

Cap Lite (SSI-CL-18) Cap Light
(3) NVG Standard Brightness Green LED's

Compatible with Night Vision

Preserves dark adaptation.
Can be used on the standard M-138 Armor crewmember microphone, or other like microphone on a helmet or headset. A Generation III product using Three LED's for brightness.
Has a Push ON - Push OFF switch that can be actuated by the lip or tongue
Uses 2 AA batteries (not included)

Accessories

Minimum $20.00 Order for Accessories unless ordering with Mike Lite

Battery Holder (SSI-ML2-7) NSN: 6160-01-537-1238
BATTERY HOLDER: Black plastic, holds 2 ea. AA batteries. This is a replacement battery holder.

Battery Holder (SSI-BG4)
BATTERY HOLDER: Black plastic, holds 4 ea. AA batteries.

 

 

 

Battery Holder Bag (SSI-BG-AA)
Cordura Nylon. Designed to hold a 2AA battery holder like the ML2-7 above. This is a replacement battery holder bag for the Mike Lites and Cap Lites. For lights without a switch on battery connector.
Battery Holder Bag (SSI-BG-AA/1)
Cordura Nylon. Designed to hold a 2 AA battery holder like the ML2-7 above. This is a replacement battery holder bag for the Mike Lites and Cap Lites. For lights with a switch on battery connector.
Wide Battery Holder Bag (BG-AA/4)
Cordura Nylon. Designed to hold 4 AA battery holder like the SSI-BG4

 Lamp Kit, Xenon (SSI-ML9-2)
A standard lamp replacement kit for Mike Lite series ML-12, ML-14, ML-14A and the Cap Lite series CL-8, CL-9, and CL-10

 

 

 

 

 
Protective Cap (SSI-ML2-6A)
Protective Cap for 9 volt batteries and AA battery holders. Protects your equipment from accidental damaged caused by improperly storing your equipment. Helps to prevent the shorting of the contacts on your equipment.

(Must be ordered with Cap Lite) No individual orders please

 

 

Weight Bag (SSI-BW-1)  NSN: 2090-01-517-6694
Black, Cordura Nylon. For holding lead shot used to counterweight NVG's.
Comes with a plastic 6 Mil. Zip-Lock bag to hold loose weights securely in the bag.
Bag has double flap, and a full width 2" Velcro mounting strip
Bag is 4 1/2" wide X 3 1/2" high
Lead shot not included.
 

Other Aviation Products of Interest

AN/AVS-9 Based on the military nomenclature AN/AVS-9. The M949 from L-3 EOS features Dual Tube Binocular viewing for optimized depth perception and large 25mm eyepieces that provides improved eye relief, accommodating operators wearing eyeglasses.

 

Mike Lights  Seitz Scientific Industries Inc. is the original manufacturer of the Mike Lite ("Lip Light"). Only a Seitz "Lite" is authorized by the U.S. Army for use in Army aircraft because only our Mike Lites meet all 20 specifications outlined in the original R&D contract (Contract No. DAAK60-90-C-0041).

Fingerlights  Seitz Scientific Industries Inc. is the original manufacturer of the Fingerlight. Only a Seitz "Lite" is authorized by the U.S. Army for use in Army aircraft because only our Fingerlights meet all 17 specifications outlined in the original R&D contract (Contract No. DAAK60-90-C-0042).

 

FOD Bags as manufactured by Seitz Scientific Industries, Inc., the original maker of the Lip Lite (Lip Light), Mike Lite (Mike Light) and Fingerlight (Finger Light). As well as offering an assortment of FOD bags, we also will customize the FOD bag to your specifications to meet your needs and requirements. All bags can be made with your logo. ALL BAGS COME IN A CHOICE OF THREE FLUORESCENT COLORS: ORANGE, YELLOW OR GREEN.

 

 

Home | Contact Us | About KERIF |  Export Regulations | How to Order

(702) 324-6463  /  (702) 869-8451 FAX  

sales@nitevis.com