Optimized for use in SureFire flashlights, SureFire lithium batteries pack a lot of power into a small package. And unlike alkaline batteries SureFire high-performance lithium batteries boast a ten-year shelf life, which means they will be ready when you need them, every time.
For all SureFire Lithium battery powered lights

 NSN: 6135-01-554-0864

	High-performance batteries, optimized for high-drain use in flashlights
	10-year shelf life
	Wide temperature tolerance
	Built-in heat and fault (short-circuit) protection
	Made in the USA to SureFire specifications

These two LFP 123A lithium-phosphate rechargeable batteries—which retain approximately 50% of their original capacity even after 500 charging cycles—will power SureFire illumination tools that use disposable 123A lithium batteries. The runtime of these LFP 123A lithium-phosphate batteries is about 50% of that provided by disposable 123A lithium batteries; maximum output levels are typically not affected. Use of these rechargeable batteries can result in a cost savings over time, depending on usage habits. Recharge only with AC/DC charger included with SF2R-KIT01, sold separately.

	LFP 123A lithium-phosphate rechargeable batteries provide hundreds of charging cycles
	Use of LFP 123A batteries can result in cost savings over time, compared to disposable 123A lithium batteries
	AC/DC charger sold separately

Kit includes two LFP 123A lithium-phosphate rechargeable batteries and a combination wall (AC) and car (DC) charger with appropriate AC and DC cables. These batteries—which retain approximately 50% of their original capacity even after 500 charging cycles—will power SureFire illumination tools that use disposable 123A lithium batteries. The charger, which features a charge status indicator light, will charge two LFP 123A lithium-phosphate batteries simultaneously. The runtime of these LFP 123A batteries is approximately 50% less than the runtime provided by disposable 123A lithium batteries; maximum output levels are typically not affected. Use of these rechargeable batteries can result in a cost savings over time, depending on usage habits

	Combination wall (AC) and car (DC) charger simultaneously recharges (2) Two Lithium-Phosphate Batteries (included)
	AC/DC charger features indicator light
	(2) Two LFP 123A Lithium-Phosphate rechargeable batteries provide hundreds of charging cycles

The SC1 Spares Carrier holds (6) Six 123A lithium batteries plus one of following shorter style lamp assemblies. Made from see-through impact-resistant polymer. Spares Carriers are "must-have" items for prepared individuals. Batteries and lamp not included.
Holds: Six 123A lithium batteries plus one of the following lamp assemblies:
Fits: P60, P60L, P61, P90, P91, R30, R60, MN01, MN02, MN03, MA02.

NSN: 6240-01-532-4209

	Impact-resistant
	O-ring sealed, watertight
	Wrist lanyard included

SC3 Spares Carrier holds four 123A lithium batteries plus one of following shorter style lamp assemblies: MN01, MN02, MN03, MA02 . Made from see-through impact-resistant polymer. Spares Carriers are "must-have" items for prepared individuals. The SC3 is also suitable as a battery-only carrier for any 1-battery or 2-battery LED flashlight. (The SC1, which holds six batteries, is more suitable for 3-battery LED flashlights.) Batteries and lamp not included.
Holds: Four 123A lithium batteries plus one of the following lamp assemblies: MN01, MN02, MN03, MA02

NSN: 6240-01-532-4210

	Impact-resistant
	O-ring sealed, watertight
	Wrist lanyard included

Premium top-grain leather with corner-stitched construction for years of durable service. Fixed belt loop accommodates belts up to 2.75" wide. Incorporates an internal retention device, eliminating the need for a flap enclosure.
Fits: 6P, 6PD, 6PDL, 6PL, 6PX-A, 6PX-B, 6PXD-A, A2L, G2, G2-LED, G2L-FYL, G2X-A, G2X-B, S2, P2X

Premium top-grain leather with corner-stitched construction for years of durable service. Fixed belt loop accommodates belts up to 2.75" wide. Incorporates an internal retention device, eliminating the need for a flap enclosure.
Fits: 6P, 6PD, 6PDL, 6PL, 6PX-A, 6PX-B, 6PXD-A, A2L, G2, G2-LED, G2L-FYL, G2X-A, G2X-B, S2, P2X

Heavy-duty Cordura nylon holster featuring a Quick-detach belt loop that allows user to attach or remove holster without having to remove belt. Has an extra-long retention flap with Velcro® closure.
Fits: 6PDL, A2L, E2DL, Kroma, LX2, U2, V2, P2X
NSN: 4240-01-578-9890

	Heavy-duty construction
	Accepts belts up to 3.0" wide
	Long flap allows use with Beam Filters

The Z60 flashlight lanyard includes a polymer snap-together ring that attaches the lanyard to your flashlight. The ring fits the groove below the flashlight tailcap. The lanyard itself is made from gray 550 parachute-cord and is equipped with two cord locks and a cord fastener.
Fits: A2L, AZ2, Kroma, L1, LX2, V2

	Adjustable length
	Gray cord, black polymer fittings