Please Call
(702) 324-6463 or email sales@nitevis.com

Categories 

Home Page

 

Accessories

bullet

Bed Vaults

bullet

Console Vaults

bullet

Gun Vaults

bullet

Flashlights

bullet

PVS-7 Parts

bullet

PVS-14 Parts

bullet

Scopecoat Covers

bullet

Stun Guns

bullet

SureFire Lights

bullet

TruckVault's

bullet

Wilcox Products

Aiming Systems

bullet

Aimpoint Red Dot

bullet

Doctor Optic MRD

bullet

ELCAN Optical

bullet

EOTech Sights

bullet

LASER's

bullet

NV Weaponsights

Beacons/Markers

bullet

GloWands

bullet

Guardians

bullet

Lazer Stiks

bullet

Pegasus

bullet

Phoenix

bullet

VIP Visual/IR

bullet

9 Volt Series

NV Binoculars

bullet

AN/PVS-15 M953

bullet

AN/PVS-31 BNVD

bullet

ANVIS-6/9 M949

bullet

BMNVD

bullet

BNVD

bullet

BNVS-15

bullet

BTS Thermal

bullet

GPNVG

bullet

G15

bullet

PVS-7B/D

bullet

SENTINEL

bullet

STEINER Binoculars

Combat ID

bullet

Beacons-Markers

bullet

IFF-67 Blood Markers

bullet

IFF-980H SCHIMS

bullet

IR-US Flags

bullet

Vehicle CIDV Panels

bullet

Warrior GloTape

Goggle Main

bullet

ANVIS Goggles

bullet

AN/PVS-7B/D

bullet

AN/PVS-14B/D

bullet

AN/PVS-15

bullet

ATN G15

bullet

ATN NVG7

bullet

ATN PVS7

bullet

ATN PS15

bullet

BNVD

bullet

ENVG Fusion

bullet

SENVG Fusion

bullet

SENTINEL BNVS

Infrared Lighting

bullet

Aviation Lip Lights

bullet

Beacons/Strobes

bullet

Blocking Filters

bullet

Finger Lights

bullet

Flashlights

bullet

LASER Illuminators

bullet

Spotlights

bullet

Vehicle Lights

LASER's

bullet

AR-2A

bullet

ATPIAL

bullet

ATPIAL-C

bullet

CQBL-1

bullet

DBAL-A2

bullet

DBAL-A3

bullet

DBAL-A4

bullet

DBAL-D2

bullet

DBAL-I2

bullet

DBAL-PL

bullet

DBAL-RL

bullet

ITAL-Classic

bullet

OTAL-A

bullet

OTAL-Classic

bullet

SBAL-PL

bullet

SBAL-RL

Monoculars

bullet

AN/PVS-14B/D

bullet

AN/PVS-18 M983

bullet

GT14

bullet

DSNVG Fusion

bullet

ENVIS M703

bullet

Gen 1, Gen 2

bullet

LRS Surveillance

bullet

MICRO-Monocular

bullet

Mini-Monocular

bullet

Odin Thermal

Mounts & Bases

bullet

A.R.M.S.

bullet

Aimpoint

bullet

ELCAN

bullet

Wilcox

Thermal Imagers
bullet

BTS Thermal

bullet

DSNVG Fusion

bullet

Odin Imagers

bullet

OTS Imagers

bullet

NV3 NOPTIC Spotlight

bullet

THoR Thermal

bullet

Thermal-Eye X320

bullet

Thermal-Eye X640

Truck Vaults

 

 

 

bullet

Bed Vaults™

bullet

ConsoleVault™

bullet

Dog/K-9 Boxes

bullet

Extreme Series

bullet

Mobile Command

bullet

S&W Gun Safes

bullet

TrunkVaults™

Weaponsights
bullet

Aimpoint Red Dot

bullet

ATN Odin

bullet

ATN ThOR

bullet

BNS/BNS-LR

bullet

CNVD-T

bullet

CNVD-T3

bullet

Day/Night Scope

bullet

ELCAN Optical

bullet

EOTech HOLOgraphic

bullet

FLIR ThermoSight

bullet

FLIR T70 ACTS-SR

bullet

FLIR T75 ACTS-LR

bullet

FLIR T-90 TaNS

bullet

IR Hunter MK II

bullet

IR Hunter MK III

bullet

M2124 CNVD

bullet

PVS-4 | TVS-5

bullet

PAS-13G LTWS

bullet

PVS-22 Clip-On

bullet

PVS-27 MUNS

bullet

PVS-30-KAC

bullet

STEINER Scopes

bullet

US Optics

bullet

Zero Lens

Helpful Info

About KERIF

 Contact Us

Definitions

 Export Regulations
FAQ's

How to Order
Terms & Conditions

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


 

X300® Ultra Handgun/Long Gun LED Weaponlight
Part Number: X300 (Black)
CLEARANCED PRICE: $175.00 + FREE S&H
(1 AVAILABLE)

 

Specifications
Name:
 X300® ULTRA
Ordering Part Number:
 X300U-A
UPC:
 084871319065
Max/High Output:
 500.0 Lumens
Tactical Runtime*:  1.3 hours
Low Output/Runtime:  N/A
Output Type:  Single-Output LED
Length:  3.60"
Bezel Diameter:  1.13"
Weight w/Batteries:  4.0 oz
Batteries:  (2) 123A (Included) 6-Volt Operation
Body Color:  Black
LED Color(s):  White
Fits:  Handguns and Long Guns w/Picatinny or Universal Rails
Warranty
1 Year 

*Runtime (at highest setting for multiple-output flashlights) until output drops below 50 lumens.

     The powerful and versatile SureFire X300 Ultra WeaponLight features a high-performance LED that generates 500 lumens of stunning white light focused by a Total Internal Reflection (TIR) lens to produce a tight beam with extended reach and significant surround light for peripheral vision. The virtually indestructible and highly efficient LED generates tactical-level light—more than enough to overwhelm an aggressor's dark-adapted vision—for 1.5 hours per set of batteries. The high-strength aerospace aluminum body is Mil-Spec hard anodized for superior toughness and is O-ring and gasket sealed to make it weatherproof. The X300 Ultra is also versatile and can be attached to a pistol or a long gun since its Rail-Lock® system permits rapid attachment to and removal from either Universal or Picatinny rails. Its integral ambidextrous push/toggle switch provides one-finger operation for either momentary or constant-on operation. Optional DG grip switches are available for use with a pistol, and an XT07 tape switch permits the X300 Ultra to be activated when attached to a long gun without altering your grip on your weapon.
 

Features

*    Quick-Detach Rail Clamp

*    Virtually indestructible LED emitter regulated to maximize output and runtime Note 1  

*    Tactical-Level output w/Total Internal Reflection (TIR) lens for close-to-longer-range applications and sufficient surround light for peripheral vision. Note 2

*    MILSPEC Hard-Anodized High-Strength Aerospace Aluminum, Impact-Resistant Polymer, Optically Coated Tempered Window, and O-Ring seals make for a rugged WeaponLight

*    Accepts optional Pistol Grip and Long Gun Forend Switches

*    Weatherproof O-ring and gasket sealing

*    Includes (2) High-energy 123A battery with 10-year shelf life

*    One Year Warranty

Note 1 Light Emitting Diodes (LED's)

With the exception of our HellFighter® WeaponLights, all current SureFire illumination tools use an LED (Light Emitting Diode) light source. An LED is a semiconductor chip that converts electrical energy directly into light. An LED is classified as a solid-state light source because it has no gas or liquid components, as do other light sources. The LED's in SureFire flashlights consists of an emitter chip mounted on a solid base; the chip is attached to electrical leads that conduct power to it, and it’s encased in a clear polymer that is shaped to focus or disperse the LED's light in the desired manner.

LED's generally emit light within a narrow spectral band. In order to produce white light, which consists of nearly the entire visible spectrum combined, we use LED's that emit near-ultraviolet blue light that strikes an upper layer of phosphors. These phosphors absorb the blue light and re-emit white light, in much the same manner that fluorescent light tubes produce white light.

LED's possess tremendous advantages over incandescent lamps. First, LED's can last thousands of hours versus less than fifty hours for high-output incandescent lamps. Second, because LED's are very robust in construction, and have no delicate parts such as glass bulbs or filaments, they are extremely resistant to vibration and shock, making them well suited for the combat environment or for mounting on firearms. Third, white-light LED's produce virtually no invisible infrared radiation, as opposed to incandescent lamps, which emit over 85% of their output as infrared, and therefore LED's are much more efficient in producing light than incandescent lamps — an important factor for battery-operated flashlights. And fourth, they will emit light over a wide range of power input, making LED's the natural choice for variable-output light sources.

Most LED's emit from a flat surface, necessitating complex reflectors and lenses to produce desirable beam characteristics. Because LED's are susceptible to potential damage from overheating, they have certain thermal design requirements that dictate the maximum output possible from a given LED, and affect the overall configuration of the specific illumination tool. LED's are difficult to manufacture without some variance in lumen output and color. For this reason, they are tested and sorted by the manufacturer into different bins according to output and color. SureFire minimizes such product variability by purchasing LED's only from the highest-quality bins.

Most SureFire's LED illumination tools contain a durable, sealed electronic power regulator that supervises the operation of the LED. This circuitry assesses battery output, monitors system performance, and controls power supplied to the LED. Power regulation provides a more consistent light output for the usable life of the batteries. Although an LED may continue to produce negligible light output for up to several hundred hours, the amount of useful light produced is of a shorter duration. Power regulation reduces the period of negligible output and increases the duration of useful light output.

Previously the only downside to white-light LED's was that they produced only negligible amounts of infrared radiation; therefore they could not be fitted with an infrared filter and then used with night vision devices (NVD's). However, in 2009 SureFire introduced its V-Series WeaponLights, which use a multi-spectrum LED that encapsulates both white light and infrared radiation in a single compact package capable of changing spectrum with the twist of a bezel, with no need for an IR filter.

 

Note 2 TIR Lenses —SureFire Total Internal Reflection (TIR) lenses are primarily refracting elements, but as their name implies they also utilize reflection. Our TIR lenses are precision-molded from a clear, tough Cyclo-Olefin Polymer that surrounds the LED emitter and gathers virtually all the light produced, then reflects and refracts it forward in a carefully designed beam pattern. Typically the pattern is a comparatively “tight” brighter central cone of light that provides good reach; this is surrounded by a cone containing the remainder of the emitted light, which provides illumination for your peripheral vision.


SureFire flashlights are the finest in the world — compact, rugged, powerful, reliable, efficient.
Engineered for maximum performance and precision manufactured, our flashlights produce optimal beams; no rings, hot spots, or shadows. When you buy a SureFire flashlight, you can be sure
you've purchased the best.
 

Accessories / Add-Ons

Part#

Description

List

SF12-BB Box of 12 SureFire 123A Lithium Batteries $22.50

Optimized for use in SureFire flashlights, SureFire lithium batteries pack a lot of power into a small package. And unlike alkaline batteries SureFire high-performance lithium batteries boast a ten-year shelf life, which means they will be ready when you need them, every time.
For all SureFire Lithium battery powered lights

 NSN: 6135-01-554-0864

bullet

High-performance batteries, optimized for high-drain use in flashlights

bullet

10-year shelf life

bullet

Wide temperature tolerance

bullet

Built-in heat and fault (short-circuit) protection

bullet

Made in the USA to SureFire specifications
 

Part#

Description

List

SF2R-CB (2) Rechargeable LFP 123A Batteries $12.00

These two LFP 123A lithium-phosphate rechargeable batteries—which retain approximately 50% of their original capacity even after 500 charging cycles—will power SureFire illumination tools that use disposable 123A lithium batteries. The runtime of these LFP 123A lithium-phosphate batteries is about 50% of that provided by disposable 123A lithium batteries; maximum output levels are typically not affected. Use of these rechargeable batteries can result in a cost savings over time, depending on usage habits. Recharge only with AC/DC charger included with SF2R-KIT01, sold separately.

bullet

LFP 123A lithium-phosphate rechargeable batteries provide hundreds of charging cycles

bullet

Use of LFP 123A batteries can result in cost savings over time, compared to disposable 123A lithium batteries

bullet

AC/DC charger sold separately
 

Part#

Description

List

SF2R-KIT01

Battery Charger + (2) LFP 123A Batteries

$29.00

Kit includes two LFP 123A lithium-phosphate rechargeable batteries and a combination wall (AC) and car (DC) charger with appropriate AC and DC cables. These batteries—which retain approximately 50% of their original capacity even after 500 charging cycles—will power SureFire illumination tools that use disposable 123A lithium batteries. The charger, which features a charge status indicator light, will charge two LFP 123A lithium-phosphate batteries simultaneously. The runtime of these LFP 123A batteries is approximately 50% less than the runtime provided by disposable 123A lithium batteries; maximum output levels are typically not affected. Use of these rechargeable batteries can result in a cost savings over time, depending on usage habits

bullet

Combination wall (AC) and car (DC) charger simultaneously recharges (2) Two Lithium-Phosphate Batteries (included)

bullet

AC/DC charger features indicator light

bullet

(2) Two LFP 123A Lithium-Phosphate rechargeable batteries provide hundreds of charging cycles
 

Part#

Description

List

SC1 Spare Parts Carrier, 6-Battery, Short $20.00

The SC1 Spares Carrier holds (6) Six 123A lithium batteries plus one of following shorter style lamp assemblies. Made from see-through impact-resistant polymer. Spares Carriers are "must-have" items for prepared individuals. Batteries and lamp not included.
Holds: Six 123A lithium batteries plus one of the following lamp assemblies:
Fits: P60, P60L, P61, P90, P91, R30, R60, MN01, MN02, MN03, MA02.

NSN: 6240-01-532-4209

bullet

Impact-resistant

bullet

O-ring sealed, watertight

bullet

Wrist lanyard included
 

Part#

Description

List

SC3 Spare Parts Carrier, 4-Battery, Short $20.00

SC3 Spares Carrier holds four 123A lithium batteries plus one of following shorter style lamp assemblies: MN01, MN02, MN03, MA02 . Made from see-through impact-resistant polymer. Spares Carriers are "must-have" items for prepared individuals. The SC3 is also suitable as a battery-only carrier for any 1-battery or 2-battery LED flashlight. (The SC1, which holds six batteries, is more suitable for 3-battery LED flashlights.) Batteries and lamp not included.
Holds: Four 123A lithium batteries plus one of the following lamp assemblies: MN01, MN02, MN03, MA02

NSN: 6240-01-532-4210

bullet

Impact-resistant

bullet

O-ring sealed, watertight

bullet

Wrist lanyard included
 

 

Part#

Description

List

MR07 Adapter Mount $84.00

The MR07 attaches to any standard rail-less 1911-type pistol with GI-type trigger guard, providing the rail necessary to mount any SureFire X Series WeaponLight. With the MR07 attached, the X Series WeaponLights can easily slide off your pistol, carried separately, and slid on again when needed. The MR07 also allows mounting SureFire P107, P117C, P117D, W117C, and W117D WeaponLights. Read More...

 

           

Part#

Description

List

MR08 Adapter Mount $110.00

     The MR08 converts the existing rail on Heckler & Koch USP (Compact) pistols in 9mm, .40 or .45 caliber, providing a Picatinny rail to mount any SureFire X Series WeaponLight. With the MR08 attached, the X Series WeaponLights can be easily slid off your pistol, carried separately, and slid on again when needed.  Read More...


 

           

Part#

Description

List

MR09 Adapter Mount $89.00

     The MR08 converts the existing rail on Heckler & Koch USP (Standard Size) pistols in 9mm, .40 or .45 caliber, providing a Picatinny rail to mount any SureFire X Series WeaponLight. With the MR08 attached, the X Series WeaponLights can be easily slid off your pistol, carried separately, and slid on again when needed.  Read More...


 

           

Part#

Description

List

MR10 Adapter Mount $58.20

     The MR10 converts the existing rail on SIG Pro 9mm and .40 S&W pistols (SP2009 and SP2340), providing a Picatinny Rail to mount any SureFire X Series WeaponLight. With the MR10 attached, the X Series WeaponLights can be easily slid off your pistol, carried separately, and slid on again when needed.  Read More...


 

           

Part#

Description

List

MR11 Adapter Mount $80.60

          The MR11 attaches to all rail-less variations of the Beretta 92 pistol, including the Government M9, and the Beretta 96, providing the rail necessary to mount any SureFire X Series WeaponLight. With the MR11 attached, the X Series WeaponLights can easily slide off your pistol, carried separately, and slid on again when needed.
Read More...

 

           

Part#

Description

List

MR14 Adapter Mount $80.60

               The MR14A and MR14B attach to rail-less SIG P226 pistols, providing the required accessory rail to mount any SureFire X Series WeaponLight. With the MR14 attached, the X Series WeaponLights can be easily slid off your pistol, carried separately, and slid back on when needed. SureFire makes an A and B version to accommodate two variations in the P226 pistol design.
Read More...

 

           

Part#

Description

List

DG-xx Grip Switch Assembly $74.30

For surgical control when using an X-Series WeaponLight (X200, X300, X400), the DG grip switch uses a minimal center-mounted pad. This allows the operator to activate the light with finger pressure without needing to move a finger from the grip.

The following list shows the specific firearm that each DG model fits:
 Read More...

 

           

Part#

Description

List

XT07 Remote Dual Switch Assembly $120.50

The XT07 switch provides reliable, remote activation for any X-series WeaponLight (X200, X300, X400) attached to a Picatinny rail. Switch module clips to Picatinny rail and features constant-on/off pushbutton switch, momentary-on pressure pad, and a lockout toggle switch to prevent accidental discharge of the light. Gives operators greater flexibility and control. XT07 has a 7 inch cable.  Read More...

 

           

Part#

Description

List

M63 Picatinny Rail Forend (2.1" x 6.58") $119.70

The SureFire M63 Picatinny Rail Forend replaces the original Forend of the Heckler & Koch MP5, allowing the user to mount a variety of accessories. Machined from military specification hard-anodized aluminum, they're stronger, dissipate heat much better, and provide rock-solid weapon fit. These precision rails enable consistent "repeat zero" of any accurately dimensioned devices attached to them, such as SureFire LASER's or WeaponLights.
 

Part#

Description

List

M73 Picatinny Rail Forend (1.67" x 6.58") $148.40

The M73 Picatinny Rail Forend replaces the original Forend of M4-type carbines (and similar firearms), allowing the user to mount a variety of accessories. Machined from military specification hard-anodized aluminum, they're stronger, dissipate heat much better, and provide rock-solid weapon fit. These precision rails enable consistent "repeat zero" of any accurately dimensioned devices attached to them, such as SureFire LASER's or WeaponLights.
 

Part#

Description

List

M77 Picatinny Rail Forend (2.15" x 3.67") $175.00

The M77 Picatinny Rail Forend replaces the original Forend of the Heckler & Koch MP5K and MP5K-PDW, allowing the user to mount a variety of accessories. Machined from military specification hard-anodized aluminum, they're stronger, dissipate heat much better, and provide rock-solid weapon fit. These precision rails enable consistent "repeat zero" of any accurately dimensioned devices attached to them, such as SureFire LASER's or WeaponLights.
 

Part#

Description

List

M80 Picatinny Rail Forend (2.29" x 7.79") $161.00

The M80 Picatinny Rail Forend replaces the original Forend of the Benelli M4 shotgun (U.S. military designation M1014), allowing the user to mount a variety of accessories. Machined from military specification hard-anodized aluminum, they're stronger, dissipate heat much better, and provide rock-solid weapon fit. These precision rails enable consistent "repeat zero" of any accurately dimensioned devices attached to them, such as SureFire LASER's or WeaponLights.
 

Part#

Description

List

M82 Picatinny Rail Forend (1.67" x 11.82") $217.00

The M82 Picatinny Rail Forend replaces the original Forend of M16 rifles with a MILSPEC Triangular Handguard Cap (and similar firearms), allowing the user to mount a variety of accessories. Machined from military specification hard-anodized aluminum, they're stronger, dissipate heat much better, and provide rock-solid weapon fit. These precision rails enable consistent "repeat zero" of any accurately dimensioned devices attached to them, such as SureFire LASER's or WeaponLights.
 

Part#

Description

List

M85 Picatinny Rail Forend (1.67" x 8.59") $199.50

The M85 Picatinny Rail Forend replaces the original Forend of M4 Mid-Length Carbines with a Triangular Handguard Cap (and similar firearms), allowing the user to mount a variety of accessories. Machined from military specification hard-anodized aluminum, they're stronger, dissipate heat much better, and provide rock-solid weapon fit. These precision rails enable consistent "repeat zero" of any accurately dimensioned devices attached to them, such as SureFire LASER's or WeaponLights.
 

Home | Contact Us | About KERIF Export Regulations | How to Order

KERIF Night Vision
(702) 324-6463  /  (702) 869-8451 FAX  

sales@nitevis.com or kerifnightvision@earthlink.net